Box Blade - 3 Point Linkage

Day: $120
Half Day: $90
24 hours: $150

This box blade is 7' (2100mm) in width with 6 ripper tines. It is attached to the tractor with the 3pt linkage. Use the top arm to tilt the box either forward or back to either use the rippers or use the blade to grade more or less. The material is trapped inside the box giving it better use of the material by not allowing it to flow outside. It has a double cutting bar on it so you can both push and pull the material with it. The 6 ripper tines are adjustable to a depth that may suit numerous jobs such as taking the top surface off an old drive or pre-rip the ground before using the rotary hoe. Use the box blade for levelling, ripping, back-filling, or grading areas such as lawns, drives, paddocks, out-door arenas etc; clearing feed lots and the like.
Additional photos of the 4105 JD Tractor with the box blade attached have been provided to illustrate what, combined, they look like. This box blade can be used with our tractor or used on your one. Tractor sized must be between 35-55hp.