Post Driver (trailered)

Day: $260
Half Day: $180
24 hours: $320

This post driver is mounted on a trailer and is ideal for those smaller fence jobs where only a few posts are required to be driven. It is easy to use getting those posts in at the exact right place. It also comes with a pilot auger attached and is driven by a petrol-powered motor.

Mower 1200 for 27HP Tractor

Day: $90
Half Day: $70
24 hours: $110

This Mower 1200 is for the John Deere Tractor 2520. It has adjustable side skids, an offsettable linkage A Framer and a floating top link for mowing undulating areas. The riding skid runners are shaped and concave pressed to reduce skid marking and scalping. There are also swing back flail cutters for rough area mowing.

This mower is ideal on small blocks and lifestyle properties for rough cutting, overgrown sections and overgrown areas, land / section clearing, small regrowth gorse management or for topping pasture or overgrowth around the property.

Width: 1200mm, Series 4PTO driveshaft, HD 5mm solid plate deck construction and side panels.

Additional photos of the 2520 JD Tractor with the mower attached have been provided to illustrate what, combined, they look like. Remember to add the 2520 tractor to your pricing.

Please note that this slasher is only hired with our John Deere 2520 tractor.

Concrete Mixer Wheelbarrow Combo

Day: $105
Half Day: $85
24 hours: $120

You can't go past the standard concrete mixer. This is towable but it is advisable to travel at speeds of no more than 50 km/phr. It would be preferable to use a trailer. Great for those small concrete jobs around the house and workplace - just add concrete pre-mix, concrete, water and let it mix.

Fertiliser Spreader - PTO Driven

Day: $120
Half Day: $90
24 hours: $150

This fertiliser spreader attaches to the back of a tractor using the PTO. It can be hired with our tractor if required.

It spreads the fertiliser easily over the paddocks with little fuss.

Box Blade - 3 Point Linkage

Day: $120
Half Day: $90
24 hours: $150

This box blade is 7' (2100mm) in width with 6 ripper tines. It is attached to the tractor with the 3pt linkage. Use the top arm to tilt the box either forward or back to either use the rippers or use the blade to grade more or less. The material is trapped inside the box giving it better use of the material by not allowing it to flow outside. It has a double cutting bar on it so you can both push and pull the material with it. The 6 ripper tines are adjustable to a depth that may suit numerous jobs such as taking the top surface off an old drive or pre-rip the ground before using the rotary hoe. Use the box blade for levelling, ripping, back-filling, or grading areas such as lawns, drives, paddocks, out-door arenas etc; clearing feed lots and the like.
Additional photos of the 4105 JD Tractor with the box blade attached have been provided to illustrate what, combined, they look like. This box blade can be used with our tractor or used on your one. Tractor sized must be between 35-55hp.

Grade Blade (3pt linkage)

Day: $120
Half Day: $90
24 hours: $150

Grader Blade for the tractor. With over 85% of the total blade bearing down on the cutting edge gives it great 'bite-in' ability. It has levelling wheel options, a reversible cutting edge and the blade has full 3way adjustment and 260 degrees rotation. This implement is great for spreading, smoothing over and collecting soil and other such material. It can be hired with our tractor if required.

27hp Tractor John Deere (2520)

Day: $235
Half Day: $180
24 hours: $315

This John Deere Tractor 2520 is a 27HP unit. It is designed for the smaller farm blocks, lifestyle blocks and large gardens. Coupled with various attachments available such as grader, silage forks, Front End Loader or Mower 1200, it will complete most jobs in the paddock or garden. The differential lock on 4WD increases traction and pulling power, while the hydrostatic transmission provides infinite speed selection without clutching or shifting required for direction changes. Easy to use, 3 point linkage. Select the attachment you need with this tractor. It is transportable by a trailer provided.

There are other attachments available with this tractor including grader, silage forks, front end loader and 1200 mower.Select the required attachment from the menu for further details on specifications and pricing. Pictured shows the tractor with two attachments - Front End Loader and 1200 mower.

Silage Forks for both Tractors

Day: $60
Half Day: $45
24 hours: $70

Silage Forks for the John Deere Tractors 2520 and 4105. It is manufactured from high strength steel and the tines are forged spring steel with a welded conus 1 taper sleeve bush. The open back frame with vertical bars gives excellent vision of material thats being handled. These silage forks are ideal for handling pit silage and light tree prunings.

Additional photos of the 2520 JD Tractor with the silage forks attached have been provided to illustrate what, combined, they look like. Remember to add the 2520 tractor or 4105 tractor to your pricing.

Grader Blade with 27HP Tractor John Deere (2520)

Day: $295
Half Day: $220
24 hours: $385

Grader Blade with the John Deere Tractor 2520. With over 85% of the total blade bearing down on the cutting edge gives it great 'bite-in' ability. It has levelling wheel options, a reversible cutting edge and the blade has full 3way adjustment and 260 degrees rotation. This implement is great for spreading, smoothing over and collecting soil and other such material.

Additional photos of the 2520 JD Tractor with the grader attached have been provided to illustrate what, combined, they look like. This pricing includes the tractor.

Fertiliser Spreader with 27HP Tractor (PTO)

Day: $315
Half Day: $250
24 hours: $415

This fertiliser spreader attaches to the back of our 27hp John Deere tractor using the PTO. It can be hired separately if required.

It spreads the fertiliser easily over the paddocks with little fuss.

Be sure to add the price of the 27hp tractor to this fertiliser spreader if hiring both items.